Licensed Utility Contractor in Central Florida
Lift Station Float Switch Repair in Orlando, FL
A failed float switch can take your entire lift station offline. Lapin Services diagnoses and repairs the problem fast — keeping your property protected and your system running the way it should.
65+ years serving Central Florida
Licensed local service team
Fast scheduling and clear communication
Service Overview
Lift Station Float Switch Repair Backed by 65+ Years of Local Experience
The float switch is one of the smallest but most critical components in any lift station. It monitors wastewater levels inside the wet well and tells the pump when to turn on and when to shut off. When a float switch sticks, corrodes, or fails entirely, the consequences can be severe: a pump that runs nonstop and burns itself out, or a pump that never activates and lets the wet well overflow. Either outcome puts your property, your tenants, and your regulatory compliance at risk.
Lapin Services has been Central Florida's trusted underground utility contractor since 1958. Our licensed technicians understand lift station systems from the wet well to the control panel, and they diagnose float switch problems at the source — not just the symptom. Whether you're managing a commercial property, a residential community, or a municipal lift station, we provide the fast, expert service you need to restore normal operation and prevent the next failure. We're available 24/7 for emergencies and planned service alike.
Problems We Solve
Common Lift Station Float Switch Repair Problems We Fix
Here are the issues our team commonly finds and resolves during lift station float switch repair calls across Central Florida.
Float Switch Corrosion and Degradation
Float switches operate in a harsh, constantly wet environment filled with sewage gases and corrosive elements. Over time, the tethered cable, housing, and internal contacts degrade — causing the switch to stick in the open or closed position. Corrosion is one of the most common reasons lift station float switches fail prematurely and is especially prevalent in Florida's humid climate. Regular inspection is the best way to catch it before it shuts your system down.
Float Switch Tangling or Misalignment
Floats that are tethered inside the wet well can become tangled on pump cables, guide rails, or other hardware — preventing them from rising and falling with the wastewater level. A tangled or repositioned float sends inaccurate signals to the control panel, causing the pump to cycle erratically or fail to respond altogether. This is a mechanical issue that requires physical inspection of the wet well to resolve correctly.
Control Panel Communication Failure
Even a fully functional float switch is useless if the signal never reaches the control panel. Failed wiring connections, corroded terminal blocks, or a malfunctioning relay can break the communication between the float and the pump — resulting in the same symptoms as a bad float switch itself. A thorough diagnosis includes the entire signal path, not just the float, to ensure the true cause of failure is identified and corrected.
Float Switch Set Points Out of Adjustment
Float switches are installed at specific depths to trigger pump-on and pump-off cycles at the correct wastewater levels. Over time, cables can slip or be inadvertently repositioned during pump service, shifting the activation points. An improperly set float results in wet wells that overfill before the pump activates, or pumps that short-cycle and wear prematurely. Recalibrating float positions is a straightforward fix that has a significant impact on system performance and pump longevity.
High-Water Alarm Float Failure
Most lift stations include a dedicated high-water alarm float set above the normal operating range. This float triggers the alarm panel — and sometimes automated alerts — when levels reach a dangerous threshold. When the alarm float fails, you lose your early-warning system entirely: the station can overflow without triggering any notification. Keeping all floats operational, including the alarm float, is essential for protecting the property and staying ahead of compliance issues.
When to Call
Signs Your Utility System Needs Professional Attention
If you notice any of these warning signs, schedule lift station float switch repair before the problem becomes more disruptive or expensive.
Lift Station Alarm Is Active
An audible or visual alarm on your lift station control panel is a direct signal that something is wrong — and a failed float switch is one of the most common causes. The alarm means wastewater levels have exceeded the normal operating range. Do not silence it without having the system diagnosed. Call Lapin Services for an immediate response.
Pump Runs Continuously Without Shutting Off
If your lift station pump runs non-stop and never cycles off, the pump-off float switch is likely stuck in the "on" position or has failed open. Continuous operation overheats the motor, shortens its service life significantly, and drives up energy costs. Left uncorrected, you'll eventually face a much more expensive pump replacement instead of a straightforward float repair.
Pump Never Activates Despite Rising Levels
The opposite problem — a pump that won't turn on — points to a float switch stuck in the "off" position or a broken connection between the float and the control panel. Without pump activation, wastewater accumulates in the wet well until it overflows. This is an emergency condition that requires immediate attention to prevent sewage discharge and potential regulatory violations.
Erratic or Short-Cycling Pump Behavior
A pump that cycles on and off in rapid, unpredictable bursts — rather than steady, timed intervals — is often responding to a float switch that is partially stuck, tangled, or sending inconsistent signals. Erratic cycling stresses the motor start capacitor and pump seals, accelerating wear. If you notice unusual pump behavior, have the float switches inspected before the pump sustains damage.
Visible Sewage Near the Wet Well or Surrounding Area
If wastewater is surfacing near the lift station, around the wet well cover, or in low-lying areas of the property, the station has either overflowed or is in the process of doing so. This is an emergency situation. A float switch failure is frequently the upstream cause. Call Lapin Services immediately at (407) 326-3367 — 24/7 emergency response is available.
Our Process
What to Expect From Your Lift Station Float Switch Repair Visit
Lapin keeps the process straightforward from the first call through final documentation, so you know what is happening at every step.
Step 1
Call or Schedule — Any Time
Reach us at (407) 326-3367 any time, day or night, or book your appointment online. Describe what you're seeing: an active alarm, unusual pump behavior, or any visible signs of overflow. We'll dispatch a technician as quickly as possible, with same-day and emergency service available throughout Orlando and Central Florida.
Step 2
Wet Well and Control Panel Inspection
Your Lapin technician performs a thorough inspection of the entire float switch system — including float positions and tether conditions inside the wet well, cable integrity, terminal connections, and the control panel's relay and alarm circuits. We assess the full signal path from float to pump before drawing any conclusions.
Step 3
Clear Diagnosis and Upfront Quote
Once we've identified the root cause, we explain exactly what failed and why — in plain language. You'll receive a transparent, upfront quote before any repair work begins. No surprises, no pressure, no unnecessary upsells. Our goal is to give you the information you need to make a confident decision.
Step 4
Float Switch Repair or Replacement
With your approval, we complete the repair — whether that means replacing a failed float, reseating and recalibrating tether depths, repairing wiring connections, or replacing a corroded control panel component. All work is performed with quality parts suited for continuous submersible service in Florida's conditions.
Step 5
System Test and Operational Verification
Before we leave, we run a full operational test of the lift station — cycling the pump through activation and shutoff, verifying alarm float function, and confirming control panel readings are normal. We'll also share any recommendations for ongoing maintenance to extend the life of your floats and protect the pump.
Why Lapin
Why Central Florida Chooses Lapin for Lift Station Float Switch Repair
Lapin combines licensed expertise, local knowledge, and responsive service for utility work throughout Central Florida.
65+ Years of Experience
Founded in 1958, Lapin has been Central Florida's trusted utility specialist for three generations — with the knowledge and credentials to back it up.
4.9★ Rating · 1,000+ Reviews
The best-rated utility contractor in Florida — not by our own measure, but by the property owners and businesses who've trusted us.
Licensed Underground Utilities Contractor
License CUC1223686. Fully certified for underground utility installation, repair, maintenance, and compliance.
End-to-End Service
One company for installation, repair, inspections, and compliance across all underground utility systems. No handoffs, no finger-pointing between subs.
Available 24/7
Utility emergencies don't wait for business hours. Our team is available around the clock so you're never left waiting when it matters most.
Related Services
Related Services
FAQs
Lift Station Float Switch Repair FAQs
What does a lift station float switch do?
A float switch monitors the wastewater level inside the lift station wet well. As levels rise, the float rises with it and triggers the pump to turn on at a preset threshold. When the level drops to a lower set point, the float signals the pump to shut off. Most lift stations use multiple floats — one to activate the pump, one to deactivate it, and a third to trigger the high-water alarm if levels reach a dangerous height.
How do I know if my lift station float switch has failed?
Common signs include an active alarm panel, a pump that runs nonstop without cycling off, a pump that never activates even as the wet well fills, or erratic short-cycling behavior. Visible sewage near the station is a sign of overflow and a likely float switch failure at the root. If you’re experiencing any of these symptoms, call Lapin Services for a prompt diagnosis.
Can a float switch be repaired, or does it always need to be replaced?
Float switches are generally inexpensive components, and in most cases, replacement is the most cost-effective and reliable solution when a float has failed. However, if the underlying issue is a wiring problem, corroded terminal connection, or misaligned tether rather than a failed float itself, repair may be all that’s needed. Your Lapin technician will diagnose the actual cause before recommending any parts or labor.
How long do lift station float switches last?
Float switches in active lift stations typically last 3–7 years, depending on the quality of the component, the composition of the wastewater, and how well the station is maintained. Stations that receive regular inspections tend to catch float degradation early — before it results in an overflow or pump failure. Lapin recommends including float inspection as part of any routine lift station service visit.
Is a lift station alarm always caused by a float switch problem?
Not always — but a float switch failure is one of the most common triggers. Other causes include a pump that has failed and is no longer moving flow, an unusually high inflow event overwhelming normal pump capacity, or a wiring fault in the alarm circuit itself. A proper diagnosis identifies which component is actually responsible rather than assuming. Never ignore an active alarm regardless of the suspected cause.
What happens if I ignore a failed float switch?
The consequences depend on which float has failed. A stuck-on float runs the pump continuously until the motor burns out, turning a minor repair into a costly pump replacement. A stuck-off float allows the wet well to overflow — creating sewage discharge, environmental liability, and potential regulatory violations. Either outcome is significantly more expensive and disruptive than addressing the float switch promptly.
Do you offer emergency lift station float switch repair?
Yes. Lapin Services is available 24 hours a day, 7 days a week, including weekends and holidays. If your lift station alarm is active or you’re dealing with an active overflow situation, call us immediately at (407) 326-3367. We respond quickly to urgent calls across Orlando and Central Florida.
What areas do you serve for lift station repairs?
We serve Orlando and the broader Central Florida region, including Orange, Osceola, Seminole, Lake, and Polk counties. If you’re unsure whether we cover your location, call us at (407) 326-3367 and we’ll confirm service availability right away.
Schedule Service
Schedule Lift Station Float Switch Repair Today
If your lift station alarm is on or your float switch isn't performing correctly, call Lapin Services now at (407) 326-3367 or schedule online — Central Florida's most trusted utility contractor is ready when it matters.